Padholdr Fit Small Series Tablet Holder Medium Duty Mount with 6-Inch Arm (PHFSMD6)

Manufacturer: RAM Brand: RAM

This mount consists of a 2.5" diameter round base that contains the universal AMPs hole pattern, double socket arm, diamond base adapter, u-bolt stainless steel base and a high strength composite cradle. The mount is designed with a 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. The hole pattern found on the diamond base adapter will connect to most RAM cradles. The included RAM's patented design dampens shock and vibration, helping to extend the life of your device. U-Bolt Dimensions: Accommodates rails from 0.5" to 1.25" in diameter. Features: 1. Support cups contain open slots to accommodate for tablets of various sizes 2. Back plate can support various size support cups 3. Spring loaded tension provides secure support for your tablet 4. Spring loaded cradle allows for quick release of your tablet 5. Full access to all ports Cradle Dimensions: Height: 8.5" minimum to 10.75" maximum Width: Maximum to 7.75" Edge Depth: Maximum to 0.56" Cradle Dimensions: Height: 8.75" minimum to 10.75" maximum Width: Maximum to 8.25" Edge Depth: Maximum to 1.10"

Manufacturer: UPSTAND Brand: MagicHold® Color: RED

** Red body color -The item hold any smartphone,iPhone 4/5/6/6 Plus, Any size tablets in market 7-13 inch( iPAD Pro 12.9",MS Surface Pro 2/3/4 or Galaxy tab/note 12.2") and all iPads, iPad Mini,iPad 2,3,4, iPad Air, Microsoft Surface, Galaxy Note, Galaxy tap,Kindle Filre HDX, Goodle Nexus, - Tablet holding part can turn 360 degree to side and tilt up/down 180 degree so you can watch the screen flat down while lying on bed - Height adjustable and the folding/stretching arm gose up/down for best viewing distance and angle - The stand is height adjustable for best height. ( low 180mm:7 inch - High 1080mm,:42.51 inch) ( As an option, you can slide the legs inbetween bed mattress so you can get much higher position,refer to the picutre shown following here) - Made of Aluminum alloy , very durable and strong and light ( Very elegant design ) -The tablet holder turns 360 degree and height adjustable. - Tablet holder has slanted cushion to hold your tablet/ipad safely without scratching it. - The item weight total around 2 kg (4.4 pound). - The item comes in semi kits or assembly in safe box with assembly guide.

Manufacturer: Displays2go Brand: Displays2go Model: IPDLMSSVL3 Color: Black

This height adjustable tablet floor stand is perfect for use in commercial settings, such as in a retail store or a hotel lobby. The locking enclosure keeps the electronic device protected while in use, yet still provides complete access to all of the iPad’s features and apps. The “Home” button is even exposed, thus granting guests complete access to all of your stored programs. This height adjustable tablet floor stand also has a tilting bracket, which allows users to adjust the angle at which the electronic device is positioned. This is especially useful when utilizing the floor-standing fixture as a POS system. This tablet floor stand has a height adjustable design that raises or lowers the positioning of an iPad from 30.5 to 48.25-inches high. Holes in the base give users the ability to bolt the fixture to the ground for added security, if desired. Dimensions: Overall: 17.25”w x 30.5” to 48.25”h x 13”d; Weight: 10 lbs; Enclosure: 8.5”w x 11.25”h x 0.75”d; Compatible Devices: iPad generations 2-4, iPad Air, and iPad Air 2; 9 to 10-inch Tablets

Manufacturer: Padholdr Brand: PADHOLDR Model: PHF7-GB.HMBS

The Padholdr Fit series is our collection of stylish looking tablet holders that Fit all of your tablet holder needs in one design. The Fit series have several key features that make them very universal for whatever tablet holder application you might need. The Fit Small series is designed to fit tablets with either Small cases on them, or tablets that are Smaller than the standard tablet size. All Fit series are designed to allow ultimate access to plug ins and necessary buttons on your tablet along with locking and non locking hardware. The Padholdr Wall mounts are designed to allow you to mount your holder and tablet to the wall easy in just a few steps. The wall mounts come in two options including a fixed mount design and a swivel mount allowing you to use the tablet in portrait or landscape modes. The wall mount screws to a flat surface, then the holder of your choice is bolted to the mount. If a swivel mount is opted for this installs between the wall mount bracket and the holder.

Manufacturer: Rokform Brand: Rokform Model: 070-10RF Color: Gunmetal/Orange

Aluminum/CNC Machined iPhone Docking/Charging Station for iPhone Devices [iPhone 5/5s, iPhone 6/6s, iPhone 6/6s PLUS]

Manufacturer: RAM Brand: RAM

The Small Tough-Claw Mount consists of the small Tough-Claw base, double socket arm, diamond base adapter and universal Tab-Tite clamping cradle. The RAM Tough-Claw is the perfect mounting base for quick and easy tool-less installation and removal on round, square, odd shaped rails and bars. The Tough-Claw can be clamped on rails from 0.625" - 1.5" outer diameter. The spring loaded, quick release Tab-Tite cradle makes it easy to load and unload your tablet, along with keeping it secure while on the go. Clamping Range: 0.625" - 1.5" Features: 1. Support cups contain open slots to accommodate for devices of various sizes, including tablets in protective sleeves 2. Back plate can support various size support cups 3. Spring loaded tension provides secure support for your tablet 4. Spring loaded cradle allows for quick release of your tablet 5. Full access to all ports Cradle Dimensions: Height: 9" minimum to 11" maximum Width: Maximum to 7.43" Edge Depth: Maximum to 0.87"

Manufacturer: Auctions411, Inc. Brand: POS IN CLOUD Color: Clear

Now you can decorate your store by transferring the Venue 8 Pro into a compact Kiosk System with fully touchscreen functions! You can also use it as a Tablet POS(Point Of Sale) Kit. The VESA 100x100mm enclosure is a standard mounting kit, can be easily mounted on any VESA arm, or use the bundled Desktop Stand which offer the landscape and portrait views, two level enclosure heights, and the security locking mechanism. The Acrylic-based design make it look unique and keep all the original beauty of the tablet. FEATURES: * The tablet NOT included! * Compatible Dell Venue 8 * VESA Kit Dimension : 163mm (Height) x 240mm (Width) x 24mm (Depth), 6.3"(H) x 9.5"(W) x 0.9"(D) * Stand Dimension: 172mm (Height) x 116mm (Depth) x 125mm (Width), 6.8"(H)x4.75"(D)x5"(W) * Compatible VESA 100x100 mm Standard * Weight : 0.85 lb, 1.60 lb w stand * Material : Acrylic 8mm thickness * Color : Black (custom color available by special order) * Easy Access to all Buttons and I/O ports * Support Landscape and Portrait Display * Embedded magnets at Stand bottom, easy to sit on metal surface like cash drawer * Come with Security screws and screwdriver * Open slots at Stand's back and bottom for security fixtures like cable lock, bolt, nuts ... etc. WHAT INCLUDED IN THE PACKAGE : One VESA enclosure One acrylic VESA stand w built-in magnets 10 Security screws with one screwdriver

Manufacturer: StandzOut Brand: Standzout Model: AI-10-001W Color: White

The telescoping Standzfree adjusts up to 48-inches (120cm) tall. The Standzfree will allow you to further enjoy your iPad in ways you have only imagined, enabling you to experience reading, movies, videos, tweets and apps all hands-free in nearly every situation. Use the Stand free iPad stand for work or play and everywhere you like using your iPad. The Standzfree iPad stand enables you to relax and enjoy it hands free.

Manufacturer: Auctions411, Inc. Brand: POS IN CLOUD Color: Clear

Now you can decorate your store by transferring the Samsung Tab S 10.5 Tablet into a compact Kiosk System with fully touchscreen functions! You can also use it as a Tablet POS(Point Of Sale) stand. FEATURES: * The Tablet is NOT included! * Compatible with Samsung Galaxy Tab S 10.5 * VESA Kit Dimension : 200mm (Height) x 30mm (Depth) x 285mm (Width) * Stand Dimension: 172mm (Height) x 116mm (Depth) x 125mm (Width), 6.8"(H)x4.75"(D)x5"(W) * Compatible VESA 100x100 mm Standard * Weight : 1.85 lb * Material : Acrylic 8mm thickness * Color : Clear (we also have transparent in stock, custom color available by special order) * Easy Access to all Buttons and I/O ports * Support Landscape and Portrait Display * Embedded magnets at Stand bottom, easy to sit on metal surface like cash drawer * Come with Security screws and screwdriver WHAT INCLUDED IN THE PACKAGE : One Black VESA enclosure One Black VESA Desktop Stand 10 Security screws with one screwdriver