Universal Security Tablet Holder With Security Cable Lock and Plate, Black (CL12UTHBB)

Manufacturer: Jackscool Brand: Jackscool Model: H47-1+C56

The Armbot Bed & Desk Mount for iPads and Tablets is the first mounting bracket that gives you the option of attaching it to your desk or wall mounted. And now we've added the vehicle mounting bracket. Besides these three mounting systems, the Armbot is also a modular design where you can shorten it to one arm section, two arm sections or use all three arm sections for the most flexible posing options. The Armbot is made of three separate lengths of 5/8" diameter brushed Aluminum tubing that combine to create an amazing number of posing and elevating viewing positions. Each tube length is 11.81" long and they are joined by durable Nylon tightening hinges. Each arm section can be detached and reattached easily. At full extension, the Armbot reaches out over 37.4" from it's mounting bracket. The desk mounting C-clamp bracket is made of Zinc alloy and can be attached to the edge of any desk, table top, headboard, nightstand, kitchen counter, end table or coffee table. The C-clamp can open as wide as 2-3/8". The wall mounting bracket is also made of Zinc alloy and needs to be attached to a wall with 4 screws that are included in every box. Attach the wall bracket to any wall near your bed or favorite lounging area for anytime viewing in total comfort. Or attach it under a kitchen cabinet so the iPad is always available when needed. The vehicle mount is also made of Zinc alloy. The Armbot comes with the C56 4-grip 360 degrees swiveling holding bracket that expands up to 7.75" and compresses down to 4.125". The four grips have soft rubber pads that protect your device and they expand up to .875" (7/8") so they can accommodate a device with the case attached.

Manufacturer: Pyle Brand: Pyle Model: PLPPADMT20

The Pyle PLPPADMT20 Tablet and Laptop Holder is your dual device solution.  The unique design swivels, tilts and rotates allowing you to position your devices exactly where you want them. The double aluminum swiveling arms are perfect for use at work or at home and will give your setup a professional studio-like appearance. One arm is made to hold your tablet,  while the other arm is made for tablets. Solid mount base with durable and rugged construction was engineered to safely and securely position your devices so you can perform comfortably.  Keep it all within arm's reach with the PLPPADMT20 Tablet and Laptop Holder.  Compatible with all laptops 10” - 15” inches, compatible with all tablets 7” - 10.1” inches.

Manufacturer: POS IN CLOUD Brand: POS IN CLOUD Color: White

Now you can decorate your store by transferring the Samsung Galaxy Tab 3/4 Tablet into a compact Kiosk System with fully touchscreen functions! You can also use it as a Tablet POS(Point Of Sale) stand. It fits Samsung Galaxy Tab 3/4 10.1 FEATURES: * The Tablet is NOT included! * Compatible with Samsung Galaxy Tab 3/4 10.1 * VESA Kit Dimension : 220mm (Height) x 30mm (Depth) x 300mm (Width) * Stand Dimension: 172mm (Height) x 116mm (Depth) x 125mm (Width), 6.8"(H)x4.75"(D)x5"(W) * Compatible VESA 100x100 mm Standard * Weight : 1.5 lb * Material : Acrylic 8mm thickness * Color : Black, White, Clear * Easy Access to all Buttons and I/O ports * Support Landscape and Portrait Display * Embedded magnets at Stand bottom, easy to sit on metal surface like cash drawer * Come with Security screws and screwdriver WHAT INCLUDED IN THE PACKAGE : One VESA enclosure One VESA Desktop Stand 10 Security screws with one screwdriver

Manufacturer: The Joy Factory Brand: The Joy Factory Model: MMA301 Color: Black

More and more creative professionals are experiencing the benefits of using a tablet for producing projects. Whether using your tablet on a tripod to take steady images and video or using with a microphone stand as a sheet music replacement, keeping your tablet at the right height and angle is ergonomic, convenient, and multiplies what you can do with your device. The MagConnect Tripod | Mic Stand Mount for iPad or tablets alike uses the tools you already have to lift your tablet experience to new heights. The MagConnect Tripod | Mic Stand Mount fits all standard tripods and microphone stands. The MagConnect patented technology is advanced, but using it is simple. First, the iPad is secured into a hard-shell Snap-On holder. When the case is attached to a compatible MagConnect product, the powerful magnet on the mount instantly interlocks your tablet holder, while a precision screw tightens for a secure fit. MagConnect mounts are built of high-quality carbon fiber arms. This superior material is lightweight and durable. The powerful combinations of carbon fiber with carefully designed joints produce mounts that are both easy to maneuver and sturdy to use. MagConnect mounts come equipped with two spherical joints for multi-angle positioning; one at the top of the mount where the included tablet holder connects to the mount and one at the base. Each joint can rotate 360º to easily position your tablet for optimum ergonomics thus reducing neck and back strain. Each MagConnect tablet holder is equipped to work with any MagConnect mount and designed to work with Apple SmartCover. And since technology is forever evolving, so is MagConnect. New tablet holders are crafted as new devices are released.

Manufacturer: RAM Brand: RAM

The RAM Tough-Claw is the perfect mounting base for quick and easy tool-less installation and removal on round, square, odd shaped rails and bars. The Tough-Claw can be clamped on rails from 0.625" - 1.5" outer diameter. Ideal for mounting tablets, action cameras, smartphones, rod holders for rod storage and much more in a wide variety of applications. Perfectly suited for mounting on the yoke of an aircraft, handlebars and seat posts of bicycles, kayak rails, roll bars and much more, the RAM Tough-Claw will soon become another essential RAM component in your collection of mounting options. Tough-Claw Clamping Range: 0.625" - 1.5" Tab-Tite Cradle Dimensions: Height: 6.80" minimum to 9" maximum Width: Maximum width to 5.68" Depth: 0.125" minimum to 1" maximum Tab-Tite Cradle Features:1. Support cups contain open slots to accommodate for tablets of various sizes 2. Back plate can support various size support cups 3. Spring loaded tension provides secure support for your tablet 4. Spring loaded cradle allows for quick release of your tablet 5. High strength materials maximize longevity of cradle 6. Full access to all ports 7. Lifetime warranty

Manufacturer: RAM Mounting Systems Brand: RAM

RAM TAB DOCK-N-LOCK Model Specific Sync & Lock Cradle for the Apple iPad mini WITHOUT CASE, SKIN OR SLEEVE The RAM-HOL-TABL11U consists of a spring loaded backplate, custom support cups and locking mechanism for the iPad mini WITHOUT skin, sleeve or case. This spring loaded design makes it easy to load and unload your iPad mini, along with keeping it secure while on the go. Cup ends are designed to optimize the functionality of your tablet, allowing access to audio jacks, usb, power, and other ports, your iPad mini can be used just as it was intended. Quickly lock the cradle, keeping your iPad mini secure and safe from theft. The RAM-HOL-TABL11U cradle is compatible with the following tablets: Apple iPad mini WITHOUT CASE, SKIN, SLEEVE The RAM-HOL-TABL11U holder is compatible with any tablet or reader that will fit the dimensions listed below. It is important to verify the dimensions of your tablet when determining the overall size. Holder Dimensions: Height: 6.55" minimum to 9.8" maximum Width: Maximum width to 5.31" Depth: 0.125" minimum to 0.56" maximum Specifications: Docking Cradle: Yes Locking Cradle: Yes Fits Tablets WITH Cases: No Fits Tablets WITHOUT Cases: Yes Low Vibration Environment: Yes High Vibration Environment: Yes Cradle Features: 1. Locking mechanism for theft deterrence 2. High strength materials maximize longevity of cradle 3. Spring loaded for ease of removal and insertion of your tablet 4. Full access to all ports 5. Customize height of holder for your tablet 6. Versatility of holder allows for attachment to many RAM ball mounts 7. Unique patent pending design enables the use of the factory iPad charging cable with docking connector 8. Compatible with many other Apple Certified cable/docking

Manufacturer: Auctions411, Inc. Brand: POS IN CLOUD Color: Clear

Now you can decorate your store by transferring the Kindle Fire 7 into a compact Kiosk System with fully touchscreen functions! You can also use it as a Tablet POS(Point Of Sale) Kit. The VESA 100x100mm enclosure is a standard mounting kit, can be easily mounted on any VESA arm, or use the optional Desktop Stand which offer the landscape and portrait modes, two level enclosure heights, and the security locking mechanism. The Acrylic-based design make it look unique and keep all the original beauty of the tablet. FEATURES: * The Kindle 7 NOT included! * Compatible with Kindle Fire 7, Kindle Fire HD 7, Kindle HDX 7" * Compatible with Square credit card slider * VESA Kit Dimension : 168mm (Height) x 226mm (Width) x 24mm (Depth), 6.6"(H) x 8.6"(W) x 0.9"(D) * Wall Mount Kit Dimension: wall plate - 86.5 x 57.5mm; VESA plate - 115mm x 115mm * Compatible VESA 100x100 mm Standard * Weight : 0.65 lb * Material : Enclosure -Acrylic 8mm thickness, wall mount - stainless steel * Color : Transparent (custom color available by special order) * Easy Access to all Buttons and I/O ports * Support Landscape and Portrait Display * Embedded magnets at Stand bottom, easy to sit on metal surface like cash drawer * Come with Security screws and screwdriver * low profile design enclosure to wall 10mm WHAT INCLUDED IN THE PACKAGE : One Kindle 7 VESA enclosure One Wall Mount Kit 10 Security screws with one screwdriver

Manufacturer: The Joy Factory Brand: The Joy Factory Model: MME201 Color: Carbon

More and more creative professionals are experiencing the benefits of using a tablet for producing projects. Whether using your tablet on a tripod to take steady images and video or using with a microphone stand as a sheet music replacement, keeping your tablet at the right height and angle is ergonomic, convenient, and multiplies what you can do with your device. The MagConnect Tripod | Mic Stand Mount for iPad or tablets alike uses the tools you already have to lift your tablet experience to new heights. The MagConnect Tripod | Mic Stand Mount fits all standard tripods and microphone stands. The MagConnect patented technology is advanced, but using it is simple. First, the iPad is secured into a hard-shell Snap-On holder. When the case is attached to a compatible MagConnect product, the powerful magnet on the mount instantly interlocks your tablet holder, while a precision screw tightens for a secure fit. MagConnect mounts are built of high-quality carbon fiber arms. This superior material is lightweight and durable. The powerful combinations of carbon fiber with carefully designed joints produce mounts that are both easy to maneuver and sturdy to use. MagConnect mounts come equipped with two spherical joints for multi-angle positioning; one at the top of the mount where the included tablet holder connects to the mount and one at the base. Each joint can rotate 360º to easily position your tablet for optimum ergonomics thus reducing neck and back strain. Each MagConnect tablet holder is equipped to work with any MagConnect mount and designed to work with Apple SmartCover. And since technology is forever evolving, so is MagConnect. New tablet holders are crafted as new devices are released.

Manufacturer: The Joy Factory Brand: The Joy Factory Model: MMA110

LockDown Secure iPad Holder for MagConnect Mounts Welcome to crossroads of security and immersive media. When you need to utilize an iPad in a public space, but don’t want it walking off when your back’s turned, then LockDown is the solution for you. Simple to install, yet thoroughly secure. The LockDown is a secure case that cradles your iPad (Gen 2-4) in safety, tethered by a cable lock (included) to an immovable object. Just unlock the cable lock with the included keys, insert the iPad, close, and lock. It’s that simple. Full access to screen, ports, and buttons. The LockDown may keep thieves at bay, but it invites your guests to use all the features of the iPad without hindrance. The LockDown doesn’t block any button, port, or feature from being fully utilized. Compatible with all MagConnect Mounts. What sets this case apart from other lockable solutions, is that this case works out-of-the-box with our award winning line of tablet mounts. Just snap the LockDown onto your MagConnect mount and secure the cable lock and it’s safe and ready for public use. Heavy duty construction for long-term use. This iPad holder is designed for the long haul. Sturdy metal construction is matched with soft lining on the inside, so bumps from the outside wont disturb the iPad within. Also compatible with Kensington Locks (sold separately). For those who use Kensington Locks in their work environment, the LockDown is also compatible with cable locks from Kensington. Contact your local provider of Kensington products to discover which Kensington lock will best meet your needs.