Samsung Galaxy TAB A 9.7 Security Anti-Theft Black Acrylic Enclosure with Wall Mounting Kit

Manufacturer: IK Multimedia Brand: IK Multimedia Model: IP-IKLIP-STANDMN-IN Color: Black

iKlip Stand is a new tabletop holder that raises your iPad mini above the desktop, positioning it for perfect access while using keyboards, mixers, controllers and other equipment.iKlip Stand puts your iPad mini right where you need it. iKlip Stand elevates your iPad mini, making room for keyboards and other equipment below, and provides a more comfortable and ergonomic workspace when using your iPad mini at a desk. Originally developed for musicians to place their iPad mini above music keyboards, mixers, or other studio devices, iKlip Stand also offers a wide range of applications for office, home and school.Designed for ideal weight balance and constructed from rugged thermoplastic material, iKlip Stand provides a secure and flexible perch for the iPad mini. Two independent articulation points allow you to adjust both height and viewing angle, in either portrait or landscape mode with a simple turn of the hand, putting your iPad mini right in the center of your attention.The iKlip Stand naturally promotes good posture while composing, playing or working by allowing you to dial in the perfect alignment and positioning for your task. This helps eliminate fatigue and strain while working, making you more productive for longer periods of time.Setup is a breeze. Simply place the stand on the flat surface, slide your iPad mini into the sure-grip clips, place your gear under your iPad mini, power up and you're ready to go! Average setup times may vary, but in our independent test labs, we were able to start composing in just under 6.7 seconds.Whether reading, studying, checking email, surfing the web or composing your next big hit, the iKlip Stand for iPad mini will help make the task easier and more enjoyable.

Manufacturer: IK Multimedia Brand: IK Multimedia Model: IP-IKLIP-STAND-IN Color: Black

iKlip Stand elevates your iPad (3rd generation, 4th generation, iPad Air or iPad Air 2), making room for keyboards and other equipment below, and provides a more comfortable and ergonomic workspace when using your iPad at a desk. Originally developed for musicians to place their iPad above music keyboards, mixers, or other studio devices, iKlip Stand also offers a wide range of applications for office, home and school. Designed for ideal weight balance and constructed from rugged thermoplastic material, iKlip Stand provides a secure and flexible perch for the iPad. Two independent articulation points allow you to adjust both height and viewing angle, in either portrait or landscape mode with a simple turn of the hand, putting your iPad right in the center of your attention.

Manufacturer: The Joy Factory Brand: The Joy Factory Model: MMA201 Color: Black

More and more creative professionals are experiencing the benefits of using a tablet for producing projects. Whether using your tablet on a tripod to take steady images and video or using with a microphone stand as a sheet music replacement, keeping your tablet at the right height and angle is ergonomic, convenient, and multiplies what you can do with your device. The MagConnect Tripod | Mic Stand Mount for iPad or tablets alike uses the tools you already have to lift your tablet experience to new heights. The MagConnect Tripod | Mic Stand Mount fits all standard tripods and microphone stands. The MagConnect patented technology is advanced, but using it is simple. First, the iPad is secured into a hard-shell Snap-On holder. When the case is attached to a compatible MagConnect product, the powerful magnet on the mount instantly interlocks your tablet holder, while a precision screw tightens for a secure fit. MagConnect mounts are built of high-quality carbon fiber arms. This superior material is lightweight and durable. The powerful combinations of carbon fiber with carefully designed joints produce mounts that are both easy to maneuver and sturdy to use. MagConnect mounts come equipped with two spherical joints for multi-angle positioning; one at the top of the mount where the included tablet holder connects to the mount and one at the base. Each joint can rotate 360º to easily position your tablet for optimum ergonomics thus reducing neck and back strain. Each MagConnect tablet holder is equipped to work with any MagConnect mount and designed to work with Apple SmartCover. And since technology is forever evolving, so is MagConnect. New tablet holders are crafted as new devices are released.

Manufacturer: Arkon Brand: ARKON Model: IPXHD001

The IPXHD001 custom fit car seat rail or floor mount fits the Apple iPad. This mount package includes Arkon's Custom Fit Apple iPad Holder and Heavy-Duty Aluminum Car Seat Rail or Floor Mount with 22" Adjustable Arm. The durable plastic holder is made specifically for the iPad with Retina display, and iPad 4, 3, and 2 only and is not compatible with the iPad mini or iPad Air. The custom holder provides support around the edge of the iPad, and cutouts are provided for easy access to the camera, power button, and power outlet. To install the iPad, just snap the device into the holder. This holder is not compatible with protective cases. The car seat rail or floor mount is made of strong aluminum, and is ideal for those who need easy access to their iPad but prefer mounting it somewhere other than the windshield or dashboard. Use a socket wrench to install the mount to the car's seat rail. Loosen the passenger seat track bolt, insert the included seat track bolt bracket (additional brackets are included to accommodate various seat rail configurations), and then retighten the bolt. Bend the 22" adjustable arm and rotate the swivel ball adapter head for 360-degree rotation for exact positioning of the iPad. Optional floor brackets are included for screwing the car dock directly into the floor of the vehicle. (Warning: Drilling into the vehicle's floor may damage the vehicle. Use caution and consult a mobile install professional to avoid drilling into any sensitive vehicle components.) For a custom fit iPad solution that locks for added security, see Arkon Model IPMCLHD001, also available on Amazon.

Manufacturer: Displays2go Brand: Displays2go Color: White

This iPad desktop stand has a hinged, locking enclosure in which an iPad 2-4, iPad Air, and iPad Air 2 is placed. The tablet holder is designed to keep the electronic device protected while in use on a table or counter. In addition to the touch screen being exposed, the "Home" button is also accessible for those looking to use different apps and programs. The iPad desktop stand is constructed from steel and includes two holes in the base for bolting the fixture to a table if desired. Also included is a 360-degree rotating bracket so users can perfectly position a tablet at any angle or orientation. In fact, users can leave the iPad within the enclosure while rotating it around. This white iPad stand for desktops is also equipped with a square bracket for credit card readers, thus allowing users to transform their electronic device into a POS system. This is especially useful for trade show and craft fair participants. Dimensions: Overall: 8.875" x 12.625" x 9" Weight: 7 lbs. Enclosure: 7.75" x 7"

Manufacturer: Makayama Brand: Makayama Model: iPad3moviemount

This high quality Apple iPad 3 case comes with an HDhat .45x wide angle lens which slides in and out for use when a wide angle lens is required. The lens is a 2 part lens i.e. when the front part of lens is unscrewed you have a fantastic macro lens for shooting close-ups! The wide angle lens more than doubles the filming capture area and is a super addition for the iPad 3. HDHat has sold 1000's of iPad and iPhone wide angle accessories and stocks thousands of high quality lenses that are perfectly manufactured to work great on the iPad 3. The Makayama case is fantastic but what creates fantastic quality photos and video is the lens and we include that lens with every purchase....guaranteed. Includes safety strap for use when using heavy video lights and bigger lenses and also includes a great micro fiber lens cloth

Manufacturer: Auctions411, Inc. Brand: POS IN CLOUD Color: Black

Now you can decorate your store by transferring the Galaxy TAB A into a compact Kiosk System with fully touchscreen functions! You can also use it as a Tablet POS(Point Of Sale) Kit. The VESA 100x100mm enclosure is a standard mounting kit, can be easily mounted on any VESA arm, or use the bundle Desktop Stand which offer the landscape and portrait modes, two level enclosure heights, and the security locking mechanism. The Acrylic-based design make it look unique and keep all the original beauty of the tablet. FEATURES: * The tablet NOT included! * Compatible with Galaxy TAB A 9.7 * Compatible with Square credit card slider * VESA Kit Dimension : 236mm (Height) x 290mm (Width) x 25mm (Depth), 9.25"(H) x 11.5"(W) x 1"(D) * Stand Dimension: 172mm (Height) x 116mm (Depth) x 125mm (Width), 6.8"(H)x4.75"(D)x5"(W) * Compatible VESA 100x100 mm Standard * Weight : 0.45 lb, 1.15 lb w tablet, 1.90 lb w tablet & stand * Material : Acrylic 8mm thickness * Color : Black (custom color available by special order) * Easy Access to all Buttons and I/O ports * Support Landscape and Portrait Display * Embedded magnets at Stand bottom, easy to sit on metal surface like cash drawer * Come with Security screws and screwdriver * Open slots at Stand's back and bottom for security fixtures like cable lock, bolt, nuts. * Use iOS Guided Access Mode to disable HOME button WHAT INCLUDED IN THE PACKAGE : 1. one VESA enclosure 2. one VESA Desktop Stand 3. 10 Security screws with one screwdriver

Manufacturer: Auctions411, Inc. Brand: POS IN CLOUD Color: Clear

Now you can decorate your store by transferring the iPad into a compact Kiosk System with fully touchscreen functions! You can also use it as a POS(Point Of Sale) Kit. The VESA 100x100mm enclosure is a standard mounting kit, can be easily mounted on any VESA arm, or use the bundle Desktop Stand which offer the landscape and portrait modes, two level enclosure heights, and the security locking mechanism. The Acrylic-based design make it look unique and keep all the original beauty of the tablet. FEATURES: * The iPad NOT included! * Compatible with Apple iPad 2nd, 3rd and 4th Generations, NOT compatible with iPad 1st Generation * Compatible with Square credit card slider * VESA Kit Dimension : 236mm (Height) x 290mm (Width) x 25mm (Depth), 9.25"(H) x 11.5"(W) x 1"(D) * Stand Dimension: 172mm (Height) x 116mm (Depth) x 125mm (Width), 6.8"(H)x4.75"(D)x5"(W) * Compatible VESA 100x100 mm Standard * Weight : 0.45 lb, 1.15 lb w tablet, 1.90 lb w tablet & stand * Material : Acrylic 5mm thickness (Stand 8mm) * Color : Black (custom color available by special order) * Easy Access to all Buttons and I/O ports * Support Landscape and Portrait Display * Embedded magnets at Stand bottom, easy to sit on metal surface like cash drawer * Come with Security screws and screwdriver * Open slots at Stand's back and bottom for security fixtures like cable lock, bolt, nuts. * Use iOS Guided Access Mode to disable HOME button WHAT INCLUDED IN THE PACKAGE : 1. one iPad VESA enclosure 2. one VESA Desktop Stand 3. 10 Security screws with one screwdriver

Manufacturer: Auctions411, Inc. Brand: POS IN CLOUD Color: Black

Now you can decorate your store by transferring the Stream 7 into a compact Kiosk System with fully touchscreen functions! You can also use it as a Tablet POS(Point Of Sale) Kit. The VESA 100x100mm enclosure is a standard mounting kit, can be easily mounted on any VESA arm, or use the optional Desktop Stand which offer the landscape and portrait modes, two level enclosure heights, and the security locking mechanism. The Acrylic-based design make it look unique and keep all the original beauty of the tablet. FEATURES: * The tablet NOT included! * Compatible with HP Stream 7 * VESA Kit Dimension : 168mm (Height) x 226mm (Width) x 24mm (Depth), 6.6"(H) x 8.6"(W) x 0.9"(D) * Wall Mount Kit Dimension: wall plate - 86.5 x 57.5mm; VESA plate - 115mm x 115mm * Compatible VESA 100x100 mm Standard * Weight : 0.45 lb, 1.15 lb w tablet, 1.90 lb w tablet & stand * Material : Acrylic 8mm thickness * Color : Black (custom color available by special order) * Easy Access to all Buttons and I/O ports * Easy Access to Windows button * Support Landscape and Portrait Display * Embedded magnets at Stand bottom, easy to sit on metal surface like cash drawer * Come with Security screws and screwdriver * Open slots at Stand's back and bottom for security fixtures like cable lock, bolt, nuts ... etc. WHAT INCLUDED IN THE PACKAGE : One VESA enclosure One low profile stainless VESA Wall Mount Kit 8 Security screws with one screwdriver